Argotec Thermoacoustic

Imagen Producto

Argotec Thermoacoustic is an impermeable adhesive mortar prepared with cement, selected aggregates, synthetic resins and additives to provide excellent adherence, plasticity and extraordinary impermeability.


Color

Grey.


Downloads

Data sheet


Applications

Agotec Themoacoustic is particularly suitable for fixing mineral-wool insulation panels to walls. It has been specially designed for rendering, waterproofing, insulating and soundproofing walls with an air chamber.
Argotec Thermoacoustic is applied by mechanical spraying onto the wall.
 

Performance

The approximate yield of this mortar is 7 kg/m2 when applying a thickness of 5 mm.

Presentation

25 kg sacks (1000 kg pallet).

Storage

In the original container in a covered area, for up to 12 months.

Support

The support should be a clean and dry brick, concrete-block or mortar-faced wall in good condition. (To apply on smooth concrete, use ARGOREV JOINT primer first.)

Instructions for use

1. Mix with water, manually or mechanically, until a fluid consistency is achieved (23% water) approx. 5.75 l/sack).
2. Apply the material onto the wall by mechanical spraying or by hand, to a thickness of 3–6 mm.
3. Fit the mineral-wood panels onto the wall rendered with ARGOTEC THERMOACOUSTIC adhesive.
 

Recommendations

Do not apply at extreme temperatures (below 5 ºC or above 35 ºC).

Technical Data

Mixing water approx.(%): 23
Grain size (mm) 0/0.5
Apparent density of powder: 1.4
Apparent density when fresh: 1.7
Open time (mins) 30
Bending strength (N/mm²): ≥2.0
Crushing strength (N/mm²): ≥7.5
Adherence on ceramic brick (N/mm²): ≥0.5
Capillarity (g/dm²min½): 0.5
Reaction to fire: A1
 


(C) 2024 Argos Derivados del Cemento. Todos los derechos reservados